HELP

使い方とお問い合わせ

1. 感度を選ぶ

フィルムの箱に書いてある感度(ISO)を選びます。よくある感度の札から選ぶか、輪を回して 1/3 段の値を選べます。

2. 測る

撮りたい物に端末を向け、ファインダーで測りたい所を押します。絞り優先なら絞りを決めるとシャッター速度が、シャッター優先ならシャッター速度を決めると絞りが出ます。[固定]を押すと値が止まり、カメラを構え直せます。

3. 組みを保存する

左上の[組み]で、カメラとフィルムの組み(名前・感度・優先・刻み)を保存します。次からは開いたらすぐ、その組みで測れます。

4. 較正する

手持ちの露出計で同じ物を測って出た EV を入れるか、晴れた日の昼に順光の景色を測ると(晴天の法則で EV 15 とみなします)、ずれを 1/3 段ずつ直せます。

よくあるご質問

照度(ルクス)は測れますか

測れません。あかりめは露出計で、照度計ではありません。

写真は保存されますか

されません。カメラの映像は明るさを測るためだけに使い、保存も送信もしません。

お問い合わせ

ryo.tsuzukihashi@tsuzukit.com(日本語・英語)

HELP

Help & Contact

1. Choose ISO

Choose the film speed (ISO) printed on the film box, from the common speed cards or by turning the dial in 1/3 stops.

2. Meter

Point your device at the subject and tap the spot to meter. With aperture priority, set the aperture to get the shutter speed; with shutter priority, set the shutter speed to get the aperture. Tap Hold to freeze the reading while you raise your camera.

3. Save a setup

Tap Setups at the top left to save a camera and film setup (name, ISO, priority, stop size). Next time it opens ready to meter with that setup.

4. Calibrate

Enter the EV from your own meter for the same subject, or meter a front-lit sunny scene at midday (treated as EV 15 by the sunny 16 rule), and adjust the offset in 1/3 stops.

FAQ

Can it measure lux?

No. Akarime is an exposure meter, not a lux meter.

Are photos saved?

No. The camera is used only to measure brightness; nothing is saved or sent.

Contact

ryo.tsuzukihashi@tsuzukit.com (Japanese or English)